Accessories - Viessmann Vitovolt 200 Technical Manual

4.1 Accessories

4.1 Accessories
D
E E
F
F
G
A Extension cable
to interconnect the panels below each
other between individual panels, 3 m
2
long, 4 mm .
B Connection cables
to connect the panels to the inverter,
2
15 m long, 4 mm
C Extension cable
to extend the connection cable, 15 m
2
long, 4 mm
D DC isolator:
Separates the generator (PV panel) at
DC side of the inverter
E Inverter
F 1.0 m long data cable for RS 485
interface to connect several inverters
below each other
G Data transfer interface
PCB for integration into the inverter
Acts in larger systems of several
inverters as link between the
individual inverters (RS 485) and must
be installed in each inverter. (Integral
power supply for internal/external
options; conductive separation from
the inverter.)
18
C B
H
K
L
H SIGNAL CARD for monitoring the
system for control error notification
K Datalogger box (with software)
Separate casing with integral
interface data transfer.
Suitable for recording data for up to
100 inverters (RS 485).
A connection to a PC (RS 232) enables
the setting of parameters,
maintenance and remote data
transfer,
or
"EASY" datalogger box (for a single
inverter).
A
N
M
L 2.0 m long data cable for RS 232
M PC
N Meter (on site)
O Large display
Not shown:
20.0 m long data cable for RS 485
interface, with loose plug−in connectors.
O
interface to connect to the PC
With impulse counter and software
for valid public display of:
H Current output in W
H Day energy in kWh
H Total energy in kWh
Only for internal applications
VITOVOLT