Table of Contents
Advertisement
Crystal Beach Configure Enable [Enabled]
Allows you to enable or disable the Configuration/Memory mapped accesses
to the Crystal Beach Configuration space located in Device 8, Fn 0, and Fn 1.
Configuration options: [Disabled] [Enabled]
SERR Signal Condition [Single Bit]
Allows you to select the ECC error that the SERR# asserts. Configuration
options: [None] [Single Bit] [Multiple Bit] [Both]
Demand Scrub Enable [Enabled]
Enables or disables the Demand Scrubbing. Configuration options: [Disabled]
[Enabled]
Patrol Scrub Enable [Enabled]
Enables or disables the Patrol Scrubbing. Configuration options: [Disabled]
[Enabled]
4GB PCI Hole Granularity [256 MB]
Allows you to select the granularity of the PCI hole for PCI resource.
Configuration options: [256 MB] [512 MB] [1.0 GB] [2.0 GB]
Memory Branch Mode [Interleave]
Allows you to select the memory branch mode. Configuration options:
[Sequential] [Interleave] [Mirror] [Single channel 0]
Branch 0 Rank Interleave [4:1]
Allows you to select the Branch 0 Rank Interleave. Configuration options:
[1:1] [2:1] [4:1]
Branch 0 Rank Sparing [Disabled]
Allows you to enable or disable the Branch 0 rank/DIMM Sparing feature.
Configuration options: [Disabled] [Enabled]
Enhanced x8 Detection [Enabled]
Allows you to enable or disable the enhanced x8 DRAM UC error detection.
Configuration options: [Disabled] [Enabled]
Force ITK Config Clocking [Disabled]
Allows you to enable or disable the FBD configuration for ITK test suite.
Configuration options: [Disabled] [Enabled]
FBDIMM(s) Thermal Throttling [Open Loop]
Allows you to disable or set the thermal throttling control. Configuration
options: [Open Loop] [Close Loop] [ASUS MemCool Fan] [Disabled]
Open Loop Type [Best Performance]
Allows you to select the Open Loop Type. Configuration options: [Best
Performance] [Best Acoustic] [User Define]
5-22
Chapter 5: BIOS information
Advertisement
Table of Contents
