Table of Contents
Advertisement
5. USB connector (10-1 pin USB34)
This connector is for USB 2.0 ports. Connect the USB cable to this
connector and another USB connector on the front I/O board. This
USB connector complies with USB 2.0 specification that supports up
to 480 Mbps connection speed.
DSBV-D USB connector
6. Serial port connector (10-1 pin COM2)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
DSBV-D Serial port connectors
The serial port module is purchased separately.
4-12
USB34
1
COM2
PIN 1
Chapter 4: Motherboard information
Advertisement
Table of Contents
