General Information; Outboard Motor Serial Number; Key Number; Safety Information - PowerTec 40Hp Owner's Manual

Table of Contents

Advertisement

Registro de números de iden-
tificação
The outboard motor serial number is
stamped on the label attached to the
port side of the clamp bracket or the
upper part of the swivel bracket.
Record your outboard motor serial
number in the spaces provided to as-
sist you in ordering spare parts from
your Powertec OutBoards dealer or
for
reference in case your outboard mo-
tor is stolen.
1. Outboard motor serial number location

Key number

If a main key switch is equipped with the
motor, the key identification number is
stamped on your key as shown in the il-
lustration Record this number in the space
provided for

Safety information

General Information

Before mounting or operating the
outboard motor, read this entire manual.
Reading itshould give you an under-
standing of the motor and its operation.
Before operating the boat, read any
owner's or operator's manuals sup-
plied with it and all labels. Be sure you
understand each item before operating.
Do not overpower the boat with this out
board motor. Overpowering the boat
culd result in loss of control. The rated
power of the outboard should be equal
to or less than the rated horsepower
capacity of the boat. If the rated horse-
power capacity of the boat is unknown,
consult the dealer or boat manufacturer.
General Information
Do not modify the outboard. Modifica-
tions could make the motor unfit or
unsafe to use.
Incorrect propeller selection and incor-
rect use may not only cause engine
damage, but also adversely affect fuel
consumption. Consult your dealer for
correct use.
Never operate after drinking alcohol or
taking drugs. About 50% of all boating
fatalities involve intoxication.
Have an approved personal flotation de-
vice (PFD) on board for every occupant.
It
1

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for PowerTec 40Hp

Table of Contents