Specifications; Recommended Engine Oil - PowerTec 40Hp Owner's Manual

Maitenance

Specifications

Dimension:
Overall length:
mm (50.4 in)
Overall width:
mm (13.7 in)
Overall height L:
mm (53.1 in)
Transom height L:
533 mm (21.0 in)
Transom height X:
(53.7in)
Transom height S:
mm(16.7 in)
Transom height L:
mm(21.7 in)
Weight (AL)S:
6kg (164 lb)
Weight (AL) L:
84.0 kg (185 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
29.4 kW@5000 r/min (40
HP@5000 r/min)
Idling speed (in neutral):
1000 x 50 rpm
Engine:
Type:
2-stroke L
Displacement:
703.0 cm3 (42.90 cu.in)
Bore stroke:
80.0 x 70.0 mm (3.15
Ignition system:
Velocidade de ralentí (en ponto morto):
1000 x 50 rpm
CDI
Spark plug with resistor (NGK): B7HS
38
Spark plug gap:
Control system:
Remot control
Tiller
Starting system:
Manual and Electric
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/EN):
Min. rated capacity (20HR/IEC):
Alternator output:
Alternator output for battery CC:
Drive unit:
Gear positions:
Gear ratio:
Trim and tilt system:
Propeller mark:
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Fuel tank capacity:
2.76 in)
gal)

Recommended engine oil:

board motor
0.6–0.7 mm (0.024–0.028 in)
430.0 A
70.0 Ah
40hp 80 W
40hp 6.0 A
Forward-neutral-reverse
2.00 (26/13)
Hydro tilt
Power trim and tilt
G
24 L (6.34 US gal) (5.28 Imp.
POWERTEC 2-stroke out-
oil