PowerTec 40Hp Owner's Manual page 42

Functioning
Procedure for hydro tilt models
1. Place the gear shift lever in neutral.
2.Pull the tilt lock lever up to the release
position.
36
3.Slightly tilt the outboard motor up to the
desired position and push the tilt lock le-
ver down to the lock position.
To return the outboard motor to the nor-
mal running position, pull the tilt lock le-
ver up to the release position and slowly
tilt the outboard motor down.
Push the tilt lock lever down to the lock
position.
6 Slowly lower the outborad to the normal
position