Trim Rod (Tilt Pin); Tilt Lock Mechanism; Tilt Support Lever For Power Trim - PowerTec 40Hp Owner's Manual

CAUTION
The trim tab also serves as an anode to
protect the engine from electrochemical
corrosion. Never paint the trim tab as it
will become ineffective as an anode.
1. Trim tab
2. Bolt

Trim rod (tilt pin)

The position of the trim rod determines the
minimum trim angle of the outboard motor
in relation to the transom.

Tilt lock mechanism

The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the
water when in reverse gear.
Componentes básicos
1. Tilt lock lever
To lock it, set the tilt lock lever in the " 1"
(lock) position. To release, push the tilt lock
lever in the "1 " (release) position.
Tilt support lever for power trim and
tilt or hydro tilt model To keep the outboard
motor in the tilted up position, lock the tilt
support lever to the clamp bracket.
13