LeapFrog Xeed Manual page 23

Leapfrog 3D Printers - Manual Xeed
The second step is to click on the
the "FFF window" pops up where you can select a standard print profile in the drop down menu.
Leapfrog is continuously testing and developing Profiles with standard print settings in order to
establish the best print results and therefor might send you additional Profiles applicable to your
printer which you can add to your software by clicking the
At the time of writing we developed three Profiles:
1. "Leapfrog_Xeed ABS_BackExtruder.fff"
in ABS with only the back extruder
2. "Leapfrog_Xeed ABS_FrontExtruder.fff"
in ABS with only the front extruder
3. "Leapfrog_Xeed ABS_BothExtruder.fff"
in ABS with both the front and back extruder
"Add" button in the left lower window. After pressing this button
most ideal settings for printing a random 3D model
most ideal settings for printing a random 3D model
most ideal settings for printing a random 3D model
"Import" button in the FFF window.
23