Unpack - LeapFrog Xeed Manual

Leapfrog 3D Printers - Manual Xeed

1.1 Unpack

In this step we will show you how to unpack your Xeed when it arrives at your doorstep. Before
you start, make sure that you have cleared a spot where you want to place the printer. We advise
you to not place the Xeed next to a window or at a place where it is draughty.

Unscrew the 4 screws in the bottom left and right sides of the shipping crate and lift
the covering crate straight up. Do this gently and push aside any cushioning material
that is impeding movement.

Lift it with preferably 4 people from the bottom plate.

Remove all the plastic from the printer and be careful not to hook the plastic on the
glass corners of the door.

Open the filament drawer and remove the door handle and power cord. Attach the
door handle onto the door.

Insert the power cord in the outlet at the back of the printer as shown in the next
picture. Then turn on your Xeed using the power switch next to the outlet.
NB: Make sure that you connect the power cord to a grounded outlet!
5