Table of Contents
Advertisement
Leapfrog 3D Printers - Manual Xeed
21
2.4.3 Start a print
It is very easy to start a print. Just press on the printer icon on the model and the printer will start
the GCODE. In the "State" field it will show the progress, time elapsed and time left(estimated).
2.4.4 The terminal
The terminal tab shows all the communication between the printer and the software. This is useful if
there is an error or the printer is not working. Advanced users can also send manual GCODE
commands to the printer on this tab.
Advertisement
Table of Contents
