About Phone - Panasonic KX-UT670 Operating Instructions Manual

Configuration
Accessibility
Setting
Key command on USB
keyboard
Date & time
Setting
Use NTP
server
NTP Server —NTP server
address
—
Synchronizat
ion Interval
Set date
*1
Select time zone
Set time
*1
Use 24-hour format
Select date format
*1 When an NTP server has not been specified, when unit is turned off, time and date settings are lost. Each time the unit is restarted,
the time and date settings must be made again.
*2 The date format associated with this setting depends on the value selected in [Select language locale] (Page 113).

About phone

Setting
Network
Status
Phone
service
Legal Open source
information licenses
116 Operating Instructions
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Description
Sets whether telephone functions
can be performed by using a USB
keyboard.
Description
Specifies whether to use an NTP
server. If enabled, enter information
for [NTP server address] and
[Synchronization Interval].
Sets the NTP server to use.
Sets the interval for synchronization
with the NTP server.
Enter the date here when an NTP
server is not used.
Selects the time zone.
Enter the time here when an NTP
server is not used.
Specifies whether the time is
displayed in a 24-hour format (when
off, the time is displayed in a 12-hour
format).
Selects the format for the display of
the date.
Description
Displays the status of the network.
Displays the status of the phone
service for each configured line.
Displays open source license
information.
Value Range Default
On/Off Off
Value Range Default
On/Off On
xxx.xxx.xxx.xxx —
10–86400 s 43200
— —
Select from 84
GMT +00:00
regions
— —
On/Off On
Normal
*2
mm/dd/yyyy
Normal
dd/mm/yyyy
yyyy/mm/dd
Value Range Default
— —
— —
— —
Document Version 2011-09