Connections and Installation
3.
Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the
illustration below.
Note
•
The cables can also be run from the bottom of the unit.
•
For details about connecting the cables, see page 97.
4.
Screw the 2 screws for wall attachment with their washers into the wall as shown in the following figure,
and then mount the unit on the wall.
83 mm
/
( 3
in )
1
4
Washer
Insert the screw to
this point.
Note
•
You can find a wall mounting template at the end of this manual.
5.
Remove the handset hook by pushing it firmly upwards.
102
Operating Instructions
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Document Version 2011-09