Change Alarm Settings - Kyocera Rise User Manual

3. Touch an existing alarm to change the settings or touch Add alarm to add a new one
and set the alarm time.
4. Touch Time to adjust the hour and minute by touching
5. Touch Repeat to select a repeat status for the alarm.
6. Touch Ringtone to select a ringtone that will play as an alarm.
7. Touch Vibrate to add a vibration feature to the alarm.
8. Touch Label to enter a name for the alarm.
9. Touch Turn alarm on to set the alarm on.
10. When you're finished, touch OK. (Alarms that are set are checked in blue.)

Touch the check mark next to an alarm to turn it on or off.
Delete an Alarm
1. Touch Home
2. Touch on the screen.
3. From the Alarms screen, touch a desired alarm, and then touch Delete.
4. Touch OK to confirm the deletion.

Change Alarm Settings

You can configure the settings of the alarm feature.
1. Touch Home
2. Touch on the screen.
3. From the Alarms screen, touch Menu
4. Configure the following options.

Alarm in silent mode: Select to sound the alarm even when the phone is set to
silent mode.

Alarm volume: Select to set the alarm volume.

Snooze duration: Select to set the snooze duration from 5 to 30 minutes in 5-minute
intervals.

Auto-silence: Select to set how long the alarm sounds.
Tools and Calendar
> > Clock.
> > Clock.
151
or
> Settings.
.