Caller Id; Call Waiting; 3-Way Calling - Kyocera Rise User Manual

Caller ID

Caller ID identifies a caller before you answer the phone by displaying the number of the
incoming call. If you do not want your number displayed when you make a call, follow these
steps.
1. Touch Home
2. Touch
3. Enter a phone number.
4. Touch .
To permanently block your number, call your wireless service provider.

Call Waiting

When you're on a call, Call Waiting alerts you to incoming calls by sounding beeps. Your
phone's screen informs you that another call is coming in and displays the caller's phone
number (if available).
To respond to an incoming call while you're on a call:
► Flick
.
To switch back to the first caller:
► Touch Switch calls.
Note: For those calls where you don't want to be interrupted, you can temporarily disable Call
Waiting by touching
reactivated once you end the call.

3-Way Calling

With 3-Way Calling, you can talk to two people at the same time. When using this feature, the
normal airtime rates will be charged for each of the two calls.
1. On the Phone screen, enter a number and touch
2. Once you have established the connection, touch Add call, and dial the second number.
(This puts the first caller on hold and dials the second number.)
3. When you're connected to the second party, touch Merge calls.
If one of the people you called hangs up during your call, you and the remaining caller stay
connected. If you initiated the call and are the first to hang up, all callers are disconnected.
Phone Calls
> .
.
before placing your call. Call Waiting is automatically
.
40