Connections Of The "Mx" Interface To The Host Device - Metrologic MS6130 MX003 Installation And User Manual

C "MX" I
ONNECTIONS OF THE
Except version 17
1. Turn off the host system.
2. Connect the MCA to the host device. Connect the "MX" interface to
the MCA.
3. Check the AC input requirements of the transformer to make sure the
voltage matches the AC outlet. The socket outlet should be near the
equipment and easily accessible.
4. Plug the transformer into the side of the MCA and the AC outlet.
5. Power up the host system.
®
MS6130 with Liberty RF
Scanner Interface
(Transmitter)
"MX" Scanner Interface
Figure 2: Connecting the "MX" (through the MCA) to a host device
To maintain compliance with applicable standards, all circuits connected
to the unit must meet the requirements for SELV (Safety Extra Low
Voltage) according to EN 60950.
4
H D
NTERFACE TO THE OST EVICE
Transformer
MCA
Host System