Installation Of The 6000 Series Universal Charging Stand - Metrologic MS6130 MX003 Installation And User Manual

I 6000 S
NSTALLATION OF THE ERIES
MLPN: 45558 - 115V, 45559 - 230V and 45560 - 240V (UK)
Transformer
Red LED
(Power)
Figure 6: Universal Charging Stand
P C T I
ERMANENT OUNTER OP NSTALLATION
1. Separate weighted base from rotating base by removing the (4) four
screws.
2. Use the rotating base as a drill template.
3. Use the (4) four wood screws provided to mount the base to the counter
top securely.
4. Snap the cup assembly to the base.
Note: For non-permanent installation, snap the cup assembly onto the
weighted base
CHARGE STATE
Battery Absent
Charge Pending
Fast-Charge
Charge Complete and Top-Off
22
U C S
NIVERSAL HARGING TAND
Green LED
(Charge Status)
CHARGE LED STATUS
LED off
LED on for 0.125sec,
off for 1.375sec
LED on
LED on for 0.125 sec,
off for 0.125sec