Table of Contents
Advertisement
Attachment of Cool sheet
<Cautions>
When attach a Heat sink after Mother-board is changed, please use the new cool sheet appended to
mother board set. Moreover, please remove the old cool sheet of a heat sink with a driver etc.
Then, it wipes off and washes in IPA
Heat Sink
ａ. Attachment of a new cool sheet
1. The cool sheet is stuck in the center of the heat sink. It rubs strongly from the top and
transfer to the heat sink
2. Pull out the blue tab and remove the vynil surface.
Be very careful since a cool sheet is very easily torn.
Please remove the old
cool sheet of the heat
sink with a driver etc.
49
Advertisement
Table of Contents
