Table of Contents
Advertisement
c. Enter FR number. Please notice that entering "FR" is not necessary.
Enter "X, Y" only (X and Y are numeral. See below).
===============================================================
FR(ex. 1.0): x.y
FR number to enter is mentioned on FR label.
d. Enter Product Serial Number.
===============================================================
Product Serial Number: nnnnnnn
Enter Product Serial Number mentioned on N-Code label.
e. Enter " y " after the Product information to write is displayed.
===============================================================
Product Manufacturer Name: NEC
Product Name: Express5800/120XX_ [N8100-XXX]
Product Version (FR): FR x.y
Product Serial Number: nnnnnnn
Chassis Manufacturer Name: NEC
Chassis Version: 856-060342-001
Chassis Serial Number: 05
Is it OK? (y/n/e): y
f. BIOS update tool will be booted automatically.
It takes 4~5 minutes. DO NOT turn off the Power Supply Unit while updating.
The following messages will appear when updating has finished.
Flash memory has been successfully programmed
PRESS ANY KEY TO RESTART THE SYSTEM
If the system does not restart
TURN THE POWER OFF, THEN ON
g.
Press Enter Key to reboot the system.
h. System will boot from the Floppy Disk Drive of the basic operating system.
Enter chk [Enter] (See a.) and confirm the Product information is right.
40
Advertisement
Table of Contents
