2.4.
Wand Emulation
Scan this code to activate the wand emulation mode:
Then select the symbology to be emulated using the Bar Code Pad page 12, without
reading the code Keyboard-Wedge Mode Activated:
* Only 8 or 13 characters messages are accepted for this emulation
Then adjust the following transmission parameters.
2.4.1. Transmission Speed
START OF CONFIGURATION
IS1000 – Configuration Guide
WAND EMULATION MODE ACTIVATED
Emulation
Code 39
Interleaved 2/5
UPC/EAN *
HIGH *
MEDIUM
LOW
18
ID
69
68
70
END OF CONFIGURATION