Monarch/Codabar; Start/Stop; Concatenation - Metrologic IS1000 Series Configuration Manual

Radio frequency bar code reader
Hide thumbs Also See for IS1000 Series:
Table of Contents

Advertisement

3.5.

Monarch/Codabar

The Codabar (or Monarch) is a very high reliable bar code which has been designed
specially for medical applications such as blood bag identification.
Its character set contains numerics and four symbols.

3.5.1. Start/Stop

NOT TRANSMITTED *
a b c d Small *
a, b, c, d are the different start/stop characters.

3.5.2. Concatenation

CONCATENATED *
This function permits the capture of two codes with only one scan. Codes must be
close to one another and on the same "line".
Once captured, the two codes are assembled and transmitted as one message.
!
Note:
To operate this function correctly, the first code must end with the "d" stop
character and the second code must start with the "d" start character. These two
start/stop characters are cleared before transmission.
START OF CONFIGURATION
IS1000 – Configuration Guide
TRANSMITTED
ABCD BLOCK
STANDARD
35
END OF CONFIGURATION

Advertisement

Table of Contents
loading

Table of Contents