Multiread; Modulo 43 Check Character - Metrologic IS1000 Series Configuration Manual

Radio frequency bar code reader

Hide thumbs Also See for IS1000 Series:

Table of Contents

3.2.3. Multiread

DISACTIVATED *

The Multiread function permits the temporary storage of one or more codes in the

decoder's memory which will then be transmitted in a single string message.

To operate the Multiread function, the desired group of codes to be first stored

must have a Multiread Character as the leading character. This character can be

chosen in the Multiread Character Table (see appendix 6.9, page 67; default is

SPACE character) after reading code Activated. The transmission will start once a

code having no Multiread Character is read.

In the case of high level security applications, a check character can be integrated

as the last character in the code and verified before transmission.

NOT VERIFIED *

Note:

See page 27 for the calculation algorithm of Code 39 Modulo 43 Check Character.

START OF CONFIGURATION

IS1000 – Configuration Guide

ACTIVATED

VERIFIED AND TRANSMITTED

VERIFIED AND NOT TRANSMITTED

END OF CONFIGURATION

Table of Contents