End Of Message Character - Metrologic IS1000 Series Configuration Manual

2.1.5. End of Message Character

One character can be systematically transmitted with each code to indicate the
end of message:
STX...ETX
CR/LF *
HT SUITE (MINITEL)
NONE LF
CR EOT
Other characters or complete fields can be added to the message using the
Preamble / Postamble function (see appendix 6.3, page 58) or the Editing Mode
(see chapter 5, page 53).
START OF CONFIGURATION END OF CONFIGURATION
8
IS1000 – Configuration Guide