SettING IDOcScAN tOUch
Scan Settings (For All Scan-to Options)
click the Scan Settings tab to bring up the setting page for the Scan-to
option selected, and change the following settings:
1
Scan Source
32
choices: "Simplex", "Duplex"
Select "Simplex" to scan single-sided sheets
or "Duplex" to scan double-sided sheets.
4
6
2
Double-sided
sheets
1
3
5
2
3
1
Single-sided
sheets
(cONtINUeD)
2
Scan mode
1
2
3
4
5
6
7
8
9
10
13
12
11
multi-color Output
3
Selector
Select a mode to scan your originals.
choices: "color", "Gray", "b/W", "multi-color
Output"
Select "color" to scan the color
•
photographs, documents, and items
containing colors in full color.
Select "Gray" to scan the image in
•
grayscale using varying shades of gray.
Select "b/W" to scan text-only originals
•
or line drawings.
Select "multi-color Output" to enable the
•
multi-color Output selector.
choices: Front Side/back Side: "color", "Gray",
"b/W"
you can make a single scan to be saved up to
3 separate images for both front side and rear
side simultaneously. Please note the settings
you made will be applied to all or respective
images. you cannot specify the particular
setting for only one image with the different
variables such as that color Dropout only
applies to gray scans, but not b/W scans.
One scan into 3 images
Original