Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOMAX 200-HS Operating And Service Instructions

Commissioning, inspection, maintenance

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
• • •
• •
•
• •
• •
•
•
•
• •
• •
• •
• • •
• •
• •
• • •
• • •
• •
• • •
• • •
• •
44
Commissioning steps
Inspection steps
Maintenance steps
1. Commissioning the system........................................... 45
2. Shutting down the system............................................. 46
3. Removing the burner (if required)................................. 47
4. Opening the boiler doors............................................... 47
5. Opening the cleaning cover........................................... 48
6. Removing and cleaning turbulators (if installed)........ 48
7. Cleaning heating surface and flue gas collector......... 49
8. Cleaning the economiser heating surfaces................. 49
9. Checking all gaskets/seals and packing cords on the
flue gas side
10. Cleaning the sight glass in the cleaning aperture....... 50
11. Checking thermal insulation components and
gaskets............................................................................ 51
12. Inserting turbulators (if appropriate) and closing the
boiler doors..................................................................... 53
13. Securing the cleaning cover.......................................... 54
14. Mounting the burner....................................................... 54
15. Checking all connections on the water and steam side
for leaks
16. Checking the inspection ports for leaks...................... 55
17. Checking the water quality............................................ 55
18. Checking the installation room ventilation
19. Checking the flue pipe for tightness
20. Adjusting the burner...................................................... 55
Page