Table of Contents
Advertisement
Call Identification (CLIP)
Call Identification (CLIP)
This service must be enabled by your telephone network provider* in order
that the phone number of the caller can appear in your telephone display
and be saved.
The telephone can save data on up to 44 incoming calls, such as phone
number (or name), date and time. When the memory is full, the Memory
full message appears in the display. The last data record received
overwrites the first (First In/First Out principle). Information on incoming
calls not taken is saved.
If a call from the same number is received again, the existing data record is
replaced by the new one.
Call List
All incoming calls are assigned to a data record number. It appears in the
display. When a new call is received, the NEW icon appears in the display.
The REP icon appears when that caller has already called previously but
the call was not taken.
Incoming calls can be deleted individually. To do this, press the S button.
To delete all the incoming calls, press and hold the S button for approx. 3
seconds.
*Enabling the function may be liable for costs.
OPERATING
Page
14
G
INSTRUCTIONS
Advertisement
Table of Contents
