Figure 2-3 Account Management - Set As Default And Delete - NEC SV9100 Setup Manual

Issue 1.0
If you have more than one account profile provisioned, then only one profile or
account can be active at any given time. To change the active profile press and hold
the account. A menu will appear as shown in Figure 2-3 Account Management - Set
as Default and Delete, which shows Set as Default option. Selecting this sets the
account selected to be the default, and activates it while deactivating the other
accounts/profiles.
Similarly, selection of Delete option will delete the account. It is recommended that
advanced setting not be changed without help from a qualified support person.

Figure 2-3 Account Management - Set as Default and Delete

2-8 UT880 NMLT Multiline Telephone Application