Setup Of Center Number; Bi-Directional Call Function; Monitoring Function - Gator PT350 User Manual

Multi-functional tracker

Table of Contents

2. Setup of Center Number

Set the center number by means of SMS through mobile phone. After the setup is successful, then the

mobile phone sending the SMS will receive the "config OK" response message from the terminal.

Command format: #710# center number # user password ##

For example: #710#134xxxxxxxx#0000##

Note: All alarming information thereafter including SOS, low power, electronic fence, etc will be returned

to such number.

Send the command in form of SMS through mobile phone to the terminal. After the setup is successful,

after sending the SMS, the mobile phone will receive the config OK response message returned from the

terminal.

Setup format: #711# Call 1# Call 2 # Call 3 # 0000##

For example:

Send command to the terminal

Note: After the setup is successful, press the CALL 1 button, then the terminal will automatically dia the

first phone number. Press the CALL 2 button, then the terminal will automatically dial the second phone

number. In addition, the terminal may receive all calls by pressing the Receive button and end all calls by

pressing the End button.

Remarks: The automatic receiving function of the terminal. For all calls, if the terminal does not choose to

end or receive within 30s, they can be received automatically.

4. SOS Function

If a ward，3number (the number in 3 above) is set, when the ward encounters emergency and presses the

SOS button, then the terminal will send alarming information to the center number and dial three ward numbers

in order.

The ward may send SMS 555 + password to the terminal of the ward; in such case, the ward terminal of

the ward will automatically call back the mobile phone of the guardian and the guardian may listen to the sound

of the surroundings within 10m around the ward.

The terminal will return confirmation message to the mobile phone

Table of Contents