Table of Contents
Advertisement
10. Set server address(ip,port)
Command Format: #803# Fixed IP address# port number#4-digit password##
This command is used to set GPRS center server address, which could be fixed IP number, like IP1, IP2,
IP3, IP4......as well as domain name with the length less than 64. After the setup is successful, the module
will send a reply with „&803&successful setting&&‟ or „&803&PASSWORD ER&&‟ if the password is
wrong.
Example: #803#58.60.185.172#9125#0000##
Setup via domain name:
Example: #803#gps.gatorcn.com#9125#0000##
11. Set user name
SMS Command Format: #801#4~20-digit letters or numbers #4-digit password ##
Example: #801#13900139000#0000##
Notes: After executing this command, the user name of the terminal on GPRS mode is required to be set up
according to actual demand. After the setup is successful, the terminal will send reply with
„&801&successful setting&&‟ or „&801&PASSWORD ER&&‟ if the password is wrong.
12. Electronic Fence Function
(1)GPS Fence Function
The guardian may log into the system, click the custom deviation setup in the user system manager, enter
the deviation setup interface, choose the longitude and latitude of the center point to be set as fence. Click the
mouse in the Google map, then reading page will display the electronic fence with longitude and latitude set.
See the figure below:
Set fence format: # command number (751) # fence radius # sampling interval # longitude # latitude #
8
Advertisement
Table of Contents
