Description; System Features - Zxa1; Specifications - Electro-Voice ZxA1-90B Owner's Manual

Description

Thank you for choosing the Electro-Voice ZxA1 loudspeaker system. Please take time to consult
this manual so that you can understand all the features built into your EV system and fully utilize
all its performance capabilities.
The Electro-Voice ZxA1 powered loudspeaker is a fully integrated audio system with carefully matched
electronics and transducers. This product makes it easy to setup a high quality sound system quickly
with a minimum amount of cables and external electronics.

System Features - ZxA1

• Two-way loudspeaker with EV8L 8" Woofer and DH2005 Titanium Compression Driver
• Rotatable High Frequency Waveguide with Two Coverage Patterns: 90° x 50° or 100° x 100°
• Integrated Amplifier with 800W Total Output
• Biamplified Design with 24 dB/Octave Filter Slopes and Transducer Protection
• Selectable 100 Hz High Pass Filter for use with an External Subwoofer
• XLR and 1/4" TRS Combo Input
• XLR Microphone Input with Gain Control
• XLR Parallel Output
• LED Indicators for Power On and Limit

Specifications

Freq. Response
Freq. Range
Amplifier Power Output:
Crossover Frequency:
High Pass Frequency:
Power Requirement (120V):
Power Requirement (230V):
Dimensions (H x W x D):
Full Range Mode.
1
4
(-3 dB):
1
(-10 dB):
1
Max. Calculated SPL:
Horizontal Coverage:
Vertical Coverage:
LF Transducer:
HF Transducer:
Line Input:
Mic Input:
Line Output:
Enclosure Material:
Grille:
457mm x 282mm x 264mm (17.98" x 11.12" x 10.38")
Net Weight:
Shipping Weight:
ZxA1-90
60 Hz - 20 kHz
48 Hz - 20 kHz
123 dB
90° or 50°
50° or 90°
800W
EV8L, 203mm (8 in) Driver
DH2005, 25mm (1 in) Exit Compression Driver
1.8 kHz
100 Hz, User Selectable
95V - 132V, 50 - 60 Hz, 0.6A
190V - 264V, 50 - 60 Hz, 0.4A
XLR and TRS Combo
XLR with Independent Gain
XLR (Mic and Line Sum)
High Impact Polystyrene
Polyester Powder Coated, 18GA Galvanized Steel
19.0 lbs (8.6 kg)
22.7 lbs (10.3 kg)
ZxA1-100
100°
100°
Electro-Voice® ZxA1 Owner's Manual