IP Settings
This menu manages the IP-related information about the computer.
The IP Settings page includes the following editable fields:
IP address
l
Network mask
l
Gateway address
l
Press <Ctrl><w> to save any changes made.
NOTE:
You must reboot the system from the System Manager/Reset page for the changes to take effect.
See "Installation" for more information on installation.
Security Admin
User Authentication Mode — Selects the authentication or authentication sequence required.
l
Local Only — The switch authenticates the user.
¡
Local then Remote — The switch attempts to authenticate the user first, and then a RADIUS server attempts to authenticate the user.
¡
Remote then Local — A RADIUS server attempts to authenticate the user first, and then the switch attempts to authenticate the user.
¡
Remote Only — A RADIUS server authenticates the user.
¡
RADIUS Server IP Address — Identifies the IP address of the RADIUS server.
l
RADIUS Shared Secret — Specifies the text string that is shared between the switch and the RADIUS server.
l
IP Filtering — Allows up to 16 IP addresses to access the switch management function, if enabled.
l
Password Admin — Enables or disables password protection.
l
Allowed IP Addresses — You can enter up to 16 IP addresses in the Allowed IP Address table.
l