Firmware Upgrade - Dell PowerConnect 3048 User Manual

Firmware Upgrade

From the Firmware Upgrade page, you can configure the system to download a new version of the management software. You can also set the system to
use the new software without overwriting the previous version. See
The Firmware Upgrade page contains the following information:
Current Hardware Version
l
Current Boot ROM Version
l
Current Software Version
l
Configuration
To save the switch's current configuration file to a server:
1. Supply the TFTP server IP address and configuration filename.
2. Select Transfer Configuration File to Server.
To load a configuration file from a server:
1. Supply the TPTP server IP address and configuration filename.
2. Select Transfer Configuration File from Server.
To restore the preinstalled configuration, select Restore.
The Configuration page contains the following options:
TFTP Server IP Address — Inserts the TFTP Server IP Address to save or load.
l
TFTP Path/Configuration Filename — Inserts the TFTP Path and configuration filename to save or load.
l
Transfer Configuration File to Server — Saves the switch configuration file to a server.
l
Transfer Configuration File from Server — Loads a configuration file from a server to the switch.
l
Restore Factory Default Configuration — Restores preinstalled default settings.
l
"Software Upgrades" for more information about this process.