Table of Contents
Advertisement
Plasma Cutting Function
1) Switch to the plasma-cutting mode.
2) While this welding & cutting equipment is operated, the power supply indicator is on and
the built-in fan will function.
3) Release the regulator valve and modulate the pressure and volume of output gas.
4) Press the cutting torch button. The sound of releasing electricity is audible and there is gas
coming out of the welding torch.
5) According to the thickness of the work piece, adjust the current output, and then the plasma
cutting can begin.
6) Put the nozzle of the cutting torch to the work piece and press the welding torch button. The
sound of the HF arc vanishes and the cutting operation can begin. After the arc starts,
maintain a distance of about 1mm in order to protect the nozzle from possible damage.
7) In case of difficulty with starting the arc, it is recommended to reduce the pressure of the gas
output.
8) If the nozzle is damaged, adjust the pressure of the gas output.
18
Hide quick links:
Advertisement
Table of Contents
