Gas Regulator Installation; Argon Installation - LOTOS LTPDC2000D User Manual

Function Switch
2.MMA Function
- Connect the plug of the electrode holder to the (+) socket on the front panel.
- Connect the plug of the ground clamp to the (-) socket on the front panel.
3.Plasma Cutting Function
- Use the gas hose to connect to one of the terminals on the air regulator and connect the
other terminals to the copper tub.
- Connect the copper nut of the cutting torch to the knob on the panel board.
Connect the plug of the ground clamp to the (-) socket on the front panel.
Welding Current Output Setting
According to practical demand, set the parameters of the current output by the operation of
"ARC," "TIG," or "CUT."
Air/Argon Regulator Installation
25
20
15
10
5
1
SHUT
AR REGULATOR
OPE N

Gas Regulator Installation

Figure 3.1:
A.
B.
Figure 3.2:

Argon Installation

16