Using The Pc Settings - Toshiba 32L5400 Series Owner's Manual

NOTE:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for computers
with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC Settings
menu.
• Depending on the specifi cation of the PC you are
playing the DVD-Video on, and the DVD's title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analogue
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analogue
audio cables are not necessary.
Computer
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
34
32404755L5400Series_En.indd 34 32404755L5400Series_En.indd 34
Using the TV's features
Signal names for mini D-sub 15 pin connector
Pin No.
1
2
3
4
5
6
7
8

Using the PC Settings

• First press o until the video input mode list
appears on the screen, then press  or  and
OK in order to select the PC input mode (- page
PC/HDMI 1
(AUDIO)
27).
• This function may not be available for some signal
or if no signal is received.
• The optimum points of the Clock Phase
and Sampling Clock adjustments may be
incomprehensible according to the input signals.
TV back view
Adjusting the picture position
1
From the Display Settings in the PREFERENCES
menu, press  or  to select PC Settings.
2
Press OK to display the PC Settings menu.
Audio cable for
PC-to-TV
connection
3
Press  or  to select an option you want to
adjust. Press  or  to adjust the settings as
required.
Pin assignment for RGB/PC terminal
Signal name Pin No.
R 9
G 10
B 11
NC (not
12
connected)
Ground 13
Ground 14
Ground 15
Ground
PC Settings
Horizontal Position
0
Vertical Position
0
Clock Phase
0
Sampling Clock 0
Reset
Signal name
NC
Ground
NC
DDC Data
H-sync
V-sync
DDC Clock
2014/07/24 17:06:27 2014/07/24 17:06:27