Table of Contents
Advertisement
PC Picture Settings (*)
(*) While in VGA/PC mode, some items in Picture
menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in VGA/
PC mode.
PC Picture controls
Contrast, Brightness and Colour adjustments in
this menu are identical to adjustments defined in TV
picture menu.
Select Reset and press OK button to reset the
adjustments.
Note:
For switching to VGA/PC source, press "SOURCE -
" button on your remote control and select VGA/PC input.
Note that VGA/PC mode menu settings are available only
while the TV is in PC source.
PC Position
Select this to display PC position menu items.
Autoposition
If you shift the picture horizontally or vertically to an unwanted
position, use this item to put the picture into correct place
automatically.
Highlight Autoposition and then press the OK button.
H Position
H (Horizontal) Position shifts the image horizontally to right
hand side or left hand side of the screen.
Press Down button until H Position is highlighted.
Press Left or Right button to adjust the value.
V Position
V (Vertical) Position shifts the image vertically towards the
top or bottom of the screen.
Press Down button until V Position is highlighted.
Press Left or Right button to adjust the value.
Configuring PC Picture Settings
Dot Clock adjustment corrects the interference that appear
as vertical banding in dot intensive presentations like
spreadsheets or paragraphs or text in smaller fonts.
Press Down button until Dot Clock is highlighted.
Press Left or Right button to adjust the value.
Depending on the resolution and scan frequency that you
input to the TV Set, you may see a hazy or noisy picture on
the screen. In such a case you can use this item to get a clear
picture by trial and error method.
Press Down button until Phase is highlighted.
Press Left or Right button to adjust the value.
English - 30 -
Dot Clock
Phase
Advertisement
Table of Contents
