Pc Settings; Horizontal And Vertical Position; Clock Phase; Sampling Clock - Toshiba REGZA ANALOGUE Series Manual

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the 'Connecting a PC' section) and
ensure that a picture is showing on the television screen. The
picture position may now be adjusted to suit personal
preference.
a
o
Press to select PC, then select PC Setting from the
SET UP menu.
b
Q
B
Press . Press and
position or Vertical position, then
the settings.

Clock Phase

The Clock phase matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
a
In the SET UP menu press
highlighted.
b
Q
Press to select, then
c
C c
Use or to adjust until the picture clears.
b
to select Horizontal
C c
or to adjust
b
until PC Setting is
b
to highlight Clock phase.

Sampling Clock

Adjusting the Sampling clock alters the number of pulses per
scan, this will clear vertical lines on the screen.
a
In the SET UP menu press
highlighted.
b
Q
Press to select, then
clock.
c
C c
Use or to adjust until the picture clears.
To return to the original factory settings.
a
In the SET UP menu press
highlighted.
b
Q
Press to select, then
c
Q
Press .
NOTE: When a PC is connected using HDMI none of these
functions will be available.
The screen is disrupted momentarily when adjusting the PC
setting. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
29
CONTROLS AND FEATURES
b
until PC Setting is
b
to highlight Sampling

Reset

b
until PC Setting is
b
to highlight Reset.