Settings; Network Config; Version; Upgrade Firmware - Rotel RT-1570 Owner's Manual

16
• <Manual Tune>: Press the PUSH SELECT knob
or the ENT key on the remote control and select stations manually by
turning PUSH SELECT knob
arrow keys on the remote control.
• <DRC>: Dynamic Range Control Select between "off", "high" and "low".
turn the PUSH SELECT knob
arrow keys on the remote control to change and press PUSH SELECT
knob 8 on the front panel or the ENT key on the remote control to save.
• <Station order>: Display station order as either "Alphanumeric",
"Ensemble" or "Valid".
• <Prune station>: Select between "Yes" or "No". The Prune setting allows
you to remove stations that are not active or can not be received.
NOTE: Prune will remove unavailable stations from both the Station
List and the DAB Preset List.
• <DAB Preset>: Displays all 30 of the DAB/DAB+ preset stations and
allows tuning to the selected preset by pressing the PUSH SELECT knob
8 on the front panel or the ENT key on the remote control.

Settings

Network Config

This section covers the setup procedue for wired or wireless LAN in more detail.
Push the Network button to enter the main menu as shown below.
- N
< Internet Radio >
My Stuff
Media Player
Settings
NOTE: If you are unable to return to the above menu automatically
after entering Network mode, push the BACK
the above menu.
< Scan for Networks >
From the main menu, select "Settings" then select "Network Config". Then
select "Scan for Networks" option (only available in wireless setup). Once
the network scan is completed, the display will show a listing of the available
wireless networks. Turn the PUSH SELECT knob
use the up/down arrow keys on the remote control to select the desired
network, then press the PUSH SELECT knob
ENT key on the remote control to confirm.
< Scan for networks >
Enter network name
View Config
Edit Config
< Enter network name > (only for wireless connection)
If the unit can not find any networks, the network name (SSID) can be entered
manually by selecting the "Enter network name" option.
on the front panel
8
8 on the front panel or using the up/down
8 on the front panel or use the up/down
button to get to
5 D
8 on the front panel or
8 on the front panel or the
RT-1570 Network/FM/DAB+ Tuner
Use the PUSH SELECT knob
8
and the ENT key on the remote control to select the letters to match the name
of the desired wireless network. When the name has been entered, select
"End" or push the REPLY 6 E
Network Name
<~ END<-- --> A aBbCcD>
NAME1
< View Config >
Show current network configuration details. Turn the knob to see
next/previous page of "Mode"-->"SSID"-->"Wireless MAC Address"
-->"Wired MAC Address"-->"IP Address"-->"Wired Device"-->"Wireless
Device". Display as below:
< Mode >
Auto / DHCP
< Edit Config >
This menu can be used to edit the current network configuration. This menu
is useful for entering a static IP, Network Mask, Gateway and DNS Server
of the selected network.
To change the network settings, press the PUSH SELECT knob
panel or the ENT key on the remote control, then turn the PUSH SELECT knob
on the front panel or use the up/down arrow keys on the remote control
to change the value. When the display shows the proper value, press the
PUSH SELECT knob on the front panel or the ENT key on the remote
8
control to confirm this value and move to the next field. Continue this until
all values have been changed.
< Signal Warning > (only for wireless connection)
Select YES or NO to enable or disable warning of low WiFi signal.
< Wired/Wireless >
Select Auto (defaults to wired if both are connected), Wired only, or
Wireless only.

Version

Turn the PUSH SELECT knob 8
arrow keys on the remote control to see all available version information.

Upgrade Firmware

Use this option to download new software for the internet radio. If new
software is available, there will be a prompt to download.
NOTE: At this stage, you can press the BACK button to cancel the
software upgrade. A software upgrade may take several minutes, do not
switch off the power to the unit or put it into standby until the operation
is complete, otherwise, the unit may become permanently damaged.
Upgrading can take 10 to 30 mins, depending on the speed of your
internet connection.

Register

This will display a key that can be used to register the unit on the Rotel
Radio Customer website: www.RotelRadio.com.
on the front panel or the up/down arrow keys
button on the front panel or remote control.
< SSID
XXXXXX
8
on the front panel or use the up/down
>
on the front