Maintenance Mode - Panasonic KX-A406 Installation Manual

KX-A406 Repeater Installation Guide
Maintenance Mode
Use the following procedure to enter Maintenance Mode on the KX‐TPA60 handset.
1. Turn on the KX‐TPA60 by pressing and holding the POWER/CANCEL key
2. After turning on the handset, a blank screen will be displayed. At this time,
press and hold the TALK/SP‐PHONE key for approximately 8 seconds
3. Press the left soft key
4. Then press the [8] key
5. Then press the [1] key
6. Press OK to enter Maintenance Mode main menu
To exit Maintenance Mode, turn off the TPA60 handset and turn it back on.
1 2
6
3
5
4