Using The Repeater; Id Confirmation Mode/Verification Tone Mode - Panasonic KX-A405 Installation Manual

3 Using the Repeater

ID Confirmation Mode/Verification Tone Mode

The ID of currently registered repeaters can be checked in ID Confirmation mode.
Also, repeater coverage can be checked using a PS, in Verification Tone mode. When the beep is no longer
heard, the PS is no longer in range of the repeater.
1.
In Operation mode, press the PROGRAM button to switch to ID Confirmation mode/Verification Tone mode.
The STATUS LED will turn amber.
2.
The current ID is indicated by the number of times the RSSI/ID LED flashes green. At the same time, the
verification tone will be activated, and the coverage of the repeater can be checked.
3.
Return the repeater to Operation mode by pressing the PROGRAM button again.
The verification tone will be deactivated.
Note
If you press and hold down the PROGRAM button for 5 seconds, the repeater will enter "Manual
Registration" mode.
Document Version 2010-06
3 Using the Repeater
Installation Manual 15