Figure 7 Connecting the input cables to the input terminal
3.
Connect the input terminals to their corresponding input ports,
Figure 8 Connecting the input terminals
Output Cable
1.
Pull the output cable through the terminal protection cover, as shown in Figure
2.
Strip 7 mm of insulation off the output cable, and connect it to the output terminal, as shown in
Figure 9.
Figure 9 Output connection terminal
3.
Connect the prepared output terminal to the DA output port.
4.
Attach the terminal protection cover, and tighten the screws as show in Figure 10.
as shown in Figure 8.
6.
13