Table 2-4, Ac Input/Output Wiring Confi Gurations (Ms2000 Models) - Magnum MS2000 Owner's Manual

Installation
2.5.8 AC Wiring Confi guration (MS2000 models)
The following table provides the different wiring confi gurations for installing and connecting the
AC conductors to and from MS2000 model inverters (see Figures 2-14 and 2-15 for installation
diagrams showing these confi gurations).
Table 2-4, AC Input/Output Wiring Confi gurations (MS2000 models)
Page 31
SI/SO (30A)
Single In/
Single Out
(30A)
AC Source 120 VAC @
1
Required < 30 amps
Reason to Have an 120
Use VAC source
that is < 30
amps.
Requires
a separate
inverter
sub-panel.
Appropriate MS2000
Models
Maximum 30A
Input (single pole)
Breaker -
Required #10 AWG
- (In & Out)
Minimum
Wire Size
Maximum 3600W
Inverter (30A @
Pass-thru 120 VAC)
capacity
Wiring Figure 2-14
Diagram
SI/DO
Single In/
Dual Out
120 VAC @
< 30 amps
@ < 15 amps per
leg (-15B models);
or < 20 amps per
leg (-20B models).
Do not want to
install a separate
inverter sub-panel.
Inverter pass-thru
capability limited
by model used.
MS2000-15B
MS2000-20B
-15B models:
30A (single pole);
-20B models:
30A (single pole)
-
#10 AWG (In)
#12 AWG x2 (Out)
-15B models:
15A/leg
(30A max.);
-20B models:
20A/leg
(30A max.)
Figure 2-15
© 2012 Magnum Energy, Inc.