System Parameter Menu; Language Selection; Time Programs - Honeywell SDC Operating Instructions Manual

SDC / DHC 43

4.2.3 System Parameter Menu

4.2.3.1 Language Selection

Factory setting
Setting range
Setting value

4.2.3.2 Time Programs

Factory setting
Setting range
EN2H-0220 GE51 R1005
rices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytu
The parameters in this menu refer to general limit
parameters and default values within the heating system.
Entry see "Menu Selection".
Exit To return to the basic display directly, press the
"operating mode" key ¢.
Alternatively, the value can be acquired by automatic exit
after the set INFO-TIME (see "System Information).
Function Several languages can be chosen for all the information
appearing on the display.
GERMAN
GERMAN, ENGLISH, FRENCH, ITALIAN (other
languages are being prepared)
1:
2:
3:
4:
Function Following the selection and confirmation by pressing the
rotary pushbutton the further display information is given
in the relevant language.
Function This parameter determines the enabling and disabling of
the time programs for the heating circuits. When
supplied, only a single time program is enabled. The use
of only a single time program will simplify the operation.
P1
P1, P1-P3
GERMAN
ENGLISH
FRENCH
ITALIAN
34
Operation