Honeywell SDC Operating Instructions Manual page 38

SDC / DHC 43
4.2.3.3.1 Separate Daytime Temperature per heating circuit
ROOM - DAY
20. 0
DC
æ ç è é ê ë ì í
Factory setting
Setting range
4.2.3.3.2 Separate Night-time Room Temperature per heating circuit
ROOM - NIGHT
16. 0
DC
æ ç è é ê ë ì í
EN2H-0220 GE51 R1005
rices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytu
Function In control mode 2 the relevant setpoint applies only to the
HC (= unmixed circuit), MC 1 (= mixing circuit 1) or MC 2
(= mixing circuit 2)
Setting:
Press the "daytime temperature" key ¥.
►
Select the desired heating circuit, HC, MC-1 or MC-2,
►
with the rotary pushbutton î.
c
o
Confirm the selected circuit by pressing the rotary
►
pushbutton î.
Set the flashing room temperature value by turning
►
the rotary pushbutton î to the desired value.
Confirm the set value by pressing the "daytime
►
temperature" key ¥ or the rotary pushbutton î.
Alternatively, the value can be acquired by automatic
►
exit after the set INFO-TIME (see "System
Information).
20 °C
5...30 °C
Function In control mode 2 the relevant setpoint applies only to the
HC (= unmixed circuit), MC 1 (= mixing circuit 1) or MC 2
(= mixing circuit 2).
Setting:
Press the "night-time temperature" key ¦.
►
Select the desired heating circuit, HC, MC-1 or MC-2,
►
with the rotary pushbutton î.
c
o
Confirm the selected circuit by pressing the rotary
►
pushbutton î.
Set the flashing room temperature value by turning
►
the rotary pushbutton î to the desired value.
Confirm the set value by pressing the "night-time
►
temperature" ¦ key or the rotary pushbutton î.
36
Operation