Time-Date Menu - Honeywell SDC Operating Instructions Manual

Operation

4.2.1 Time-Date Menu

rices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytu
The following current date values can be set in this
menu:
- Time
- Calendar year
- Calendar day – calendar month
- Time changeover mode (Summer - Wintertime)
All the listed values are preset at the factory and as a
rule do not need to be updated. If corrections are
necessary in exceptional cases, the values can be
adjusted to the current conditions. An internal pre-
programmed calendar provides for automatic time
changeover at the recurrent summer – winter
changeover dates. If necessary, the automatic time
changeover can be deactivated.
The current weekday from Mon. to Sun. is determined
from the calendar data and requires no setting.
Entry see Menu Selection.
Modify
►
►
►
►
►
Termination In order to terminate and return to the basic display,
press the "operating mode" key ¢ or wait the INFO-
TIME set for automatic termination.
Select menu by pressing the rotary pushbutton
In the Date – Time menu, select desired calendar
value (time, year, day-month, change) by turning the
î
rotary pushbutton
Press rotary pushbutton
turning the rotary pushbutton
Confirm value by pressing the rotary pushbutton
If desired, select further calendar values by turning
the rotary pushbutton
25
SDC / DHC 43
.
î
and change value by
î
.
î
and change them.
EN2H-0220 GE51 R1005
î
.
î
.