Canon LBP-800 User Manual page 47

Plug and Play
If you are using Windows 95 OSR2.1 or later, an error may occur while
trying to install using plug and play. If you get an error, install the
software using the CD-ROM. To check which version of Windows 95
you are using, open the System window in Control Panel and look at the
version number in the General tab. 4.00.950 B or 4.00.950 C means you
are using OSR2.1 or later.
The following procedure only applies to installation under Windows 95.
The first time you start Windows with the LBP-800 attached to your
computer the New Hardware Found dialog box appears.
1. Select Driver from disk provided by hardware manufacturer in
the New Hardware Found dialog box. The Install From Disk
dialog box appears.
Chapter 3 Using the Canon Advanced Printing Technology
33