Parameter Settings; Parameter List - Pfaff 1525 Instruction Manual

10

Parameter settings

.05
(only on machines with Quick-EcoDrive and control unit P70ED or Quick-PicoDrive and
control unit P41 PD-L)
● The selection of the user level and the alteration of parameters is described in the separa-
te instruction manual for the drive unit.
10

Parameter list

.05.01
6 607
660
7 700
702
703
705
707
727
760
See Chapter 3 Specifications
Speed max.
Bobbin monitor function
0 = 0ff
l = by sensor (-926/06)
ll = by stitch counting
Needle position 0,
Needle reference position
Needle position 1 (needle lowered)
on the1525 and 1526
on the1526-G
Needle position 2 (take-up lever raised)
on the -900/81
on the -900/82
on the1525-G-900/86
Needle position 5 (end cutting signal 1)
on the -900/81and -900/86
on the -900/82
Needle position 6
(Start tension release signal 2)
on the1525 and 1526
on the1525-G
Counter for bobbin monitoring brings
ON= stop and signal at output Y36
OFF = signal at output Y36 without stop
Multiplier for the fixed value (200) for
stitch count
Care and maintenance
B, C 300 - 6000
B, C 0 -II
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C 0 - 255
B, C ON - OFF
A, B, C 0 - 250
▲ ▲
0 -
80 85
25
213 234
225
230
175 186
225
180 192
200
0 -
10 -
10 - 4