Engine Controls - Craftsman C950-52124-0 Owner's Manual

A
C
D
STOP
SNOWTHROWER CONTROLS (Continued)
H. Skid Shoes — Used to adjust the ground clearance of the
auger housing.
I. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
J. Headlight — Used to operate the snowthrower in poor light-
ing conditions.

ENGINE CONTROLS

A. Choke Control Knob — Used to start a cold engine (see
Figure 3).
B. Electric Start Button — Used to start the engine using the
electric starter.
G
F
H
C. Primer Button — Used to inject fuel directly into the carbure-
tor manifold to ensure fast starts in cool weather.
D. Safety Key — Must be inserted to start engine. Pull out to
stop. Do not turn safety key.
E. Starter Cord Handle — Used to start the engine manually.
F. Fuel Tank and Cap — Fill the fuel tank to approximately
1-1/2 in. (38 mm) below the top of the neck to allow for fuel
expansion.
G. Oil Fill Cap (Extended Dipstick)
H. Fuel Shut-Off Valve (if equipped) — Used to turn the fuel
supply off for out-of-season storage.
11
FEATURES AND CONTROLS
B
E
Figure 3