Connecting Your Tv; Back Connections - Toshiba 58L9300 Series Owner's Manual

Back connections

Connection example
Audio system
DVD video player
or
(with component
video outputs)
• Before connecting any external equipment, turn
off all main power switches.
• The unauthorized recording of TV programmes,
DVDs, video tapes and other materials may
infringe upon the provisions of copyright law.
• The COMPONENT / VIDEO INPUT consists of
three component video signals (Y, Pb/Cb, Pr/Cr)
and provides the best picture performance. These
terminals can only be used with the component
video compatible equipment e.g. DVD video
player, etc.
• If you connect to COMPONENT VIDEO for the
COMPONENT / VIDEO INPUT terminals, screen
display will appear changes to COMPONENT.
• Additional equipment and cables shown are not
supplied with this TV.
NOTE:
o (2) COMPONENT / VIDEO INPUT terminals
Standard mode
Red White Yellow
40

Connecting your TV

TV back view
Set Top Box or
VCR (Normal)
Component mode
Red
(Audio) White Red Green Blue
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
NOTE:
• DO NOT connect the DIGITAL AUDIO output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal to the
OPTICAL input of a receiver or processor.
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifi er's volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by sudden high volume audio.
• Turn off the amplifi er before you connect or
disconnect the TV's power cord. If you leave the
amplifi er power on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set PCM
for Digital Audio Output menu (- page 26).
Otherwise, the speakers and your hearing may be
damaged by sudden high volume audio.
Connecting an amplifi er equipped with a Dolby Digital
decoder
TV side view
Front speaker Surround speaker
Centre speaker
You can enjoy dynamic realistic sound by
connecting the TV to an amplifi er equipped with a
Dolby Digital decoder or Dolby Digital processor.
When using this setup, select Auto in the Digital
Audio Output menu (- page 26).
Amplifier equipped with
Dolby Digital decoder
To Optical type
digital audio input
Optical digital cable
(not supplied)
To Digital Audio
output terminal
Sub woofer
Signal flow