Starting A Washing Programme - SCAN domestic SFO 2201 User Manual

Starting a washing programme

Program Cycle Selection
Information
Intensive For heaviest soiled
crockery, and
normally soiled pots
and pan, dishes
etc with dried on
soiling.
Normal For normally soiled
loads, such as pots,
plates, glasses and
lightly soiled pans.
ECO This is standard
programme, it is
(*EN 50242)
suitable to clean
normally soiled ta-
bleware and it is the
most efficient pro-
gramme in terms of
its combined energy
and water consump-
tion for that type of
tableware.
90 min For lightly soiled
crockery and glass.
1 time For lightly soiled
loads that do not
need excellent dry-
ing efficiency
Rapid wash A shorter wash for
lightly soiled loads
and quick wash
• Fill the Rinse aid container.
• *EN 50242 : This programme is the test cycle. The informa-
tion for comparability test in accordance with EN 50242, as
follows: Rinse aid setting: 6
Starting a wash cycle...
• Pull out the basket.
• Pour in the detergent
• Insert the plug into the socket. The power supply is 220-240
VAC 50 HZ, the specification of the socket is 10 A 250 VAC.
• Make sure that the water supply is turned on to full pres-
sure.
• Press the program button, the wash program will be
changed as follows direction
ECO->90 min>1 Hour->Rapid->Intensive->Normal;
If a program is selected, the response light will light. Then
press the Start/Reset button, the dishwasher begins to start.
Description of cycle Detergent
Pre/main
Pre-wash (50°C) 3/15 g
Wash (70°C) or (3 in 1)
Rinse
Rinse
Rinse (70°C)
Drying
Pre-wash 3/15 g
Wash (60°C) or (3 in 1)
Rinse
Rinse (70°C)
Drying
Pre-wash 3/15 g
Wash (50°C) or (3 in 1)
Rinse
Rinse (70°C)
Drying
Wash (65°C) 18 g
Rinse (70°C) or (3 in 1)
Drying
Wash (65°C) 18 g
Rinse (50°C) or (3 in 1)
Drying
Wash (40°C) 15 g
Rinse
Rinse (40°C)
•
Premise: You can modify the washing program, If the dish-
washer just worked for a short time. Otherwise, the detergent
may have already been released, and the appliance may have
already drained the wash water. in this case, the detergent dis-
penser must be refilled.
Press Start/Pause Button to pause the machine when the door
is closed, Press Program Button more than three seconds the
machine will be in stand by state, then you can change the pro-
gram to the desired cycle setting
The program lights show the status of the dishwasher:
a) One of the program lights on . . . . . . . . . . . stand by or pause.
b) One of the program lights blinking. . . . . . . . . . . . . . . running.
If you open the door during washing, the machine will pause.
When you close the door and press the Start/Pause Button, the
machine will keep on working after 10 seconds.
25
Run time Energy (Kwh)
(min.)
140 0,90
120 0,70
180 0,61
60 0,65
60 0,55
30 0,23
When you press the Start/Reset button to pause dur-
ing washing, the program light will stop blinking and the
dishwasher will mooing every minute unless you press the
Start/Reset button to start.
Water con- Rinse
sump. (L) aid
10 *
8 *
6,5 *
7 *
6 *
6