To Memorize Channels; Tv Operation; Air/Cable Selection; Add/Delete Channel - Toshiba 19LV61K Service Manual

Basic setup

To memorize channels

This TV/DVD is equipped with a channel memory feature which allows channels
to skip up or down to the next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be programmed into the
TV/DVD·s memory. To use this TV/DVD with an antenna, set the Signal Type
option to the Air mode. When shipped from the factory, this menu option is in
the Cable mode.

Air/Cable selection

1 Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Channel", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2 Press or to select "Auto Ch Memory",
then press or ENTER.
Channel
Add/Delete >>
DTV Signal >>
Auto Ch Memory
>>
Ch Label >>
3 Press or to select "Signal Type".
Auto Ch Memory
Signal Type Cable
Automatic Search Start
4 Press or to select "Air" or "Cable".
Auto Ch Memory
Signal Type Air
Automatic Search Start
Air - VHF/UHF channels
Cable - Cable TV channels
5 Press EXIT/CANCEL to return to the normal
screen.
24
Basic setup
To memorize channels (Continued)
Adding Channel (digital channel only)
If you find a new channel unregistered, you can add the
new channel into the channel memory.
1 Tune in the new channel.
2 Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Channel", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
3 Press or to select "Add/Delete", then
press or ENTER.
Channel
Add/Delete >>
DTV Signal >>
Auto Ch Memory >>
Ch Label >>
: Select ENTER:Set
4 Press or to select "Adding Channel",
then press or ENTER. The new channel will
be added into the channel memory.
Add/Delete
Adding Channel >>
Add/Delete >>
Clear All >>
: Select ENTER:Set
5 Press EXIT/CANCEL to return to the normal
screen.
26
ENTER
/ / /
EXIT/CANCEL
MENU
Automatic search
1 Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Channel", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2 Press or to select "Auto Ch Memory",
then press or ENTER.
Channel
Add/Delete >>
DTV Signal >>
Auto Ch Memory >>
Ch Label >>
3 Press or to select "Automatic Search",
then press or ENTER.
Auto Ch Memory
Signal Type Cable
Automatic Search Stop
Analog Channel Found : 0
Digital Channel Found : 0
Programming Now
: Select ENTER:Cancel
4 The TV/DVD will begin memorizing all the
channels available in your area.
ENTER
/ /
EXIT/CANCEL
MENU
Clear All
All channels are deleted from the channel memory.
1 Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Channel", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2 Press or to select "Add/Delete", then
press or ENTER.
Channel
Add/Delete >>
DTV Signal >>
Auto Ch Memory >>
Ch Label >>
: Select ENTER:Set
3 Press or to select "Clear All", then press
or ENTER.
Add/Delete
Adding Channel >>
Add/Delete >>
Clear All >>
: Select ENTER:Set
4 Press EXIT/CANCEL to return to the normal
screen.

Add/Delete channel

You can select the channel that you want to skip.
1 Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
"Channel", then press or ENTER.
Main Menu
Picture
Audio
Channel
Lock
Setup
: Select ENTER:Set
2 Press or to select "Add/Delete", then
press or ENTER.
Channel
Add/Delete >>
DTV Signal >>
Auto Ch Memory
>>
Ch Label >>
: Select ENTER:Set
3 Press or to select "Add/Delete", then
press or ENTER.
Add/Delete
Adding Channel >>
Add/Delete >>
Clear All >>
: Select ENTER:Set

TV operation

TV operation
TV operation
1 To turn on the TV/DVD, press POWER.
(POWER indicator on the front of the unit changes
green. It may take approx. 10 seconds for a picture
to appear on screen.)
2 Adjust the volume level by pressing VOL + or – .
The volume level will be indicated on the screen
by orange bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of orange bars also decreases.
3 Set the Signal Type option to the appropriate
position (see "Air/Cable selection" on page ).
24
Air - VHF/UHF channels
Cable - Cable TV channels
4 Press the Direct Channel Selection (0-9, –)
buttons or CH / to select the channel.
(If you press only channel number, channel
selection will be delayed for a few seconds.)
ENTER
/ / /
EXIT/CANCEL
MENU
4 Press or to select the channel that you
want to skip.
Add/Delete
CH Signal
2 Analog Add
3 Analog Add
3-001 Digital Delete
3-002 Digital Add
4 Analog Delete
: Select : Adjust
5 Press or to select "Add" or "Delete",
whichever function you want to perform.
Add/Delete
CH Signal
2 Analog Delete
3 Analog Add
3-001 Digital Delete
3-002 Digital Add
4 Analog Delete
: Select : Adjust
Repeat steps 4 - 5 for other channels you
6
want to add or delete.
7 Press EXIT/CANCEL to return to the normal
screen.
25
POWER
0–9, –
VOL +/–
CH /
ENTER
TO SELECT ANALOG CHANNELS
1-9: Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
10-99: Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
100-125: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the – button,
followed by the remaining number.
Example, to select channel 015-001, press 0, 1,
5, –, 0, 0, 1.
• If a channel is selected with only audio content,
"Audio only" will be displayed on the screen.
• If a channel is selected with a weak digital
signal, "Digital channel signal strength is low"
will be displayed on the screen.
The same program may be available on either
an analog channel or a digital channel. You may
choose to watch either format.
• If a channel is selected to which you have not
subscribed, "Digital channel is encrypted" will
be displayed on the screen.
VHF/UHF/CABLE CHANNELS
Air Cable
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-135 (100) (135)
01 (5A)
Note:
• If a channel with no broadcast is selected, the sound
will automatically be muted.
• It may take a few seconds for a digital channel picture
to appear on screen after being selected.
27